Aluminum Cyclone Dust Extractor / Bag Filter Type Pulse Jet Dust Collector
Induction furnace pulse jet bag filter primary metal scrap furnace dust collector .For different working condition in steel plant , we will provide special and expert filtration solutions for the dust collection / dust extration systems for the fumes generated from the melting furnace , sintering furnace , blast furnace / shaft furnace ,induction furnace .
Pulse Jet Dust Collector Features:
Except the features that it has high efficiency dust collecting, big capacity of air rate, stable performance, and it is easy to operate and maintain. The usage is better, for example: not easy to let the powder stay, and it has wide applications. It is widely used in the ventilation, dust removing and powder restoration in the grain, food, feed, metallurgical, chemical, building material, medical and other industries.
The primary metal melting dust filtration sytsem , aluminum scarp , steel / iron scrap melting furnace dust filration , including the spark arrester , bag filter , ducting works fan and chimney .
It is used for different dryer, mixer, granulator or relative machine to remove the dust.
According to different Bag Quantity, Plenum Pulse Dust collector could be classified as 32bags/room, 64bags/room,96bags/room,128bags/room. Each kind will be divided into many different type-33 kinds in total.
||1.2-2.0(Speed varies at different dust points)
|Net filtration area(㎡)
|No. of bag(pc)
|Dust content at inlet(g/m³)
||Valve Φ725,air tank Φ100
|Discharge device YJD-26
||Outlet 300×300mm Capacity 24m³/h
||Double flap valve 305×915
||Dia. Φ300,capacity 21m³/h
||Air slide 250mm,flow rate 2.0m³/㎡, Pressure 6860pa,If the dust content exceeds 700g/m³ at inlet, bag filter with big screw conveyor should be considered.
|Bag size and material
||Dia.×lengthΦ130×3050,Gross weight of polyethylene felt 450g/㎡,temperature 120℃
|Note 1: Net filtration area means the area of one chamber during dust removing.
|2: The compressed air consumption is based on supply of compressed air pipe from an air compression station. The consumption should be considered to be 1.3 times more if the supply is provided by an independent air compressor.