Place of Origin:
CHINA
Brand Name:
ZK CORP
Certification:
ISO,CE
Model Number:
Φ750×750-Φ1830×6400
Enverinomental Friendly Ball Mill Crusher For Various Ore Materials
Ball Mill Introduction:
In the production industries of cement, silicate products, new building materials, refractory materials, fertilizers, ferrous and non-ferrous metal beneficiation and glass ceramics, ball mills are the key equipment for crushing materials after they are crushed. It can dry or wet pulverize various ores and other grindable materials. The ball mill is suitable for grinding various ores and other materials, and is widely used in mineral processing, building materials and chemical industries.
Specifications of Mineral Ball Mill:
| model | cylinder rev(r/min) |
grind media weight (t) |
feeding size(mm) | output size(mm) |
output (t/h) |
motor | |
| type | power | ||||||
| MQG900X1800 | 38 | 1.8 | ≦25 | 0.074-.06 | 0.8-1 | Y255M-8 | 22 |
| MQG900X3000 | 37.4 | 2.7 | ≦25 | 0.074-0.3 | 0.8 | Y225M-6 | 30 |
| MQG1200x2400 | 32 | 4.8 | ≦25 | 0.074-.06 | 1.5-2 | Y280M-8 | 45 |
| MQG1200X4500 | 30 | 5.2 | ≦25 | 0.074-.06 | 1.5 | Y280M-6 | 55 |
| MQG1500x4500 | 28.8 | 10 | ≦25 | 0.074-0.4 | 3-4 | JR126-8 | 110 |
| MQG1500x5700 | 28.8 | 12 | ≦25 | 0.074-0.4 | 3-5 | JR127-8 | 130 |
| MQG1500x6400 | 28.8 | 13 | ≦25 | 0.074-0.4 | 3-5 | JR127-8 | 130 |
| MQG1830x5400 | 24.5 | 15 | ≦25 | 0.074-0.4 | 5-7 | JR137-8 | 210 |
| MQG18306400 | 24.5 | 19 | ≦25 | 0.074-0.4 | 5-7 | JR137-8 | 210 |
| MQG1830x7000 | 24.5 | 20 | ≦25 | 0.074-0.4 | 6-8 | JR138-8 | 245 |
| MQG2200x7000 | 21.6 | 30 | ≦25 | 0.074-0.8 | 8-10 | JR158-8 | 380 |
| MQG2200x9000 | 21.4 | 34 | ≦25 | 0.074-0.8 | 8-10 | JR1510-8 | 475 |
| MQG2400x7000 | 20.4 | 36 | ≦25 | 0.074-0.8 | 10-14 | JR1510-8 | 475 |
| MQG2400x8000 | 20.4 | 42 | ≦25 | 0.074-0.8 | 10-14 | YR630-8 | 560 |
| MQG2600x8000 | 19.6 | 52 | ≦25 | 0.074-0.8 | 16-20 | JR1512-8 | 630 |
| MQG3000x9000 | 18.3 | 78 | ≦25 | 0.074-0.8 | 20-25 | YR1000-8/1180 | 1000 |
Factors Affecting the Output of Ball Mill
As a commonly used grinding equipment, the output of ball mill is an important indicator to measure the quality of the ball mill. So what are the factors that affect the output of the ball mill?
1. Mill volume. Generally, the larger the volume of the mill, the greater the processing capacity.
2. The water content of the material. If the water content of the material is too high, it will affect the uniformity of the feeding and make the feeding time too long. Secondly, if the wet material is fed too much, it may cause the phenomenon of "sticky grinding". Therefore, the feed moisture is usually required.
3. Loading capacity of grinding body. After the mill runs for a period of time, the output will decrease. This is because with the impact and grinding of the grinding body in the cylinder, the grinding body will wear out, so the grinding body must be refilled in time. But it is not that the more abrasives, the better. If the steel balls accumulate too high, the impact of the steel balls on the material will be slowed down, and on the contrary, the grinding output will be reduced.
Send your inquiry directly to us
